Skip to product information
1 of 3

FLIR

Teledyne FLIR LEPTON® FS

Teledyne FLIR LEPTON® FS

SKU:

Regular price $69.00 USD
Regular price $109.00 USD Sale price $69.00 USD
Discounted Sold out

Lepton FS is a non-radiometric 160 x 120 resolution micro thermal camera module with reduced thermal sensitivity, reduced scene dynamic range, and up to 3% inoperable pixels but the lowest price ever for a factory Lepton. These units balance performance and price, enabling monitoring applications where radiometry is not required and pixel-level image information is less important than broad thermal data. With the lowest cost per pixel in the Lepton family, low power consumption, and simple integration, Lepton FS provides integrators an appropriate thermal capability for innovative thermal monitoring products in smart building automation, security, occupancy sensing, and more.

Just as we were the first place to get FLIR Lepton seven years ago, we are bringing this new Lepton to you first at a highly compelling price to make your thermal imaging application more economically viable. To celebrate, all accessory boards below are 10% off excluding the new tCam-mini Wi-Fi board.

 

160 x 120 RESOLUTION NON-RADIOMETRIC MICRO THERMAL CAMERA

COMMON INTERFACES AND FACTORY SUPPORT TO SHORTEN TIME TO MARKET

Standard Lepton mechanical interface, electrical interface, and US-based Technical Services team.

  • 160 x 120 thermal pixel resolution
  • Low operating power – 140 mW typical and 650 mW during shutter event
  • Small 11.8 x 12.7 x 7.2 mm package

ACCEPTABLE PERFORMANCE AT DISCOUNTED PRICE

Affordable, non-radiometric thermal imagery and data.

  • -10 °C to 350 °C scene dynamic range
  • Thermal sensitivity <75 mK
  •  ≤3% inoperable pixels

BUILD INNOVATIVE THERMAL MONITORING SOLUTIONS

Build innovative thermal monitoring solutions appropriate for heat, security, and comfort monitoring applications.

  • Home and building automation
  • Heat and occupancy sensing
  • Security and location monitoring

 

Specifications

Overview

  • Sensor technology
    • Uncooled VOx microbolometer
  • Spectral range
    • Longwave infrared, 8 μm to 14 μm
  • Array format
    • 160 x 120, progressive scan
  • Pixel size
    • 12 μm
  • Effective frame rate 8.7 Hz (commercial application exportable)
  • Thermal sensitivity
    • <75mK NEdt
  • Operability
    • Number of non-defective pixels shall be >97% Adjacent clusters, rows, columns may contain defective pixels that are not factory corrected and unable to be corrected. 3% of operability failures allowed. Temperature compensation Automatic. Output image independent of camera temperature.
  • Non-Radiometric Performance
    • While some of the Lepton FS units may output radiometric values per pixel, the Lepton FS units are not guaranteed against any radiometric accuracy and users whom wish to use Lepton FS products for radiometric applications do so at their own risk. Teledyne FLIR and GroupGets will not support questions pertaining to calibrating Lepton FS units.
  • Non-uniformity corrections
    • Integral Shutter
  • Scene dynamic range
    • High Gain Mode: -10 to 140 degrees C typical
    • Low Gain Mode: -10 to 350 degrees C typical
  • Image optimization
    • Factory configured and fully automated
  • FOV - horizontal
    • 57°
  • FOV - diagonal
    • 71°
  • Lens Type
    • f/1.1
  • Output format
    • User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied)
  • Solar protection
    • Integral

Electrical

  • Input clock
    • 25-MHz nominal, CMOS IO Voltage Levels
  • Video data interface
    • Video over SPI
  • Control port
    • CCI (I2C-like), CMOS IO Voltage Levels
  • Input supply voltage
    • (nominal) 2.8 V, 1.2 V, 2.5 V to 3.1 V IO Power dissipation (Typical, room temp) Nominally 150 mW (operating), 650 mW (during shutter event), 5 mW (standby)

Mechanical

  • Package dimensions without socket (w x l x h)
    • 11.50 x 12.70 x 6.835 mm
  • Weight
    • 0.91 grams

 

Environmental

  • Optimum operating temperature range
    • -10C to +65C
  • Non-operating temperature range
    • -40 C to +80 C
  • Shock
    • 1500 G @ 0.4 ms

 

Part Numbers 500-0771-FS1

Tips for integrating Lepton into a Housing

  • Recommended Material
    • PORON®
  • Socket Stack
    • Socket > Lepton > Foam > Window > Enclosure
  • Maximum Force
    • < 1Kg (more force will damage the shutter)
  • The foam must be cut out so that it does not interfere with the mechanical shutter pins.
  • Thickness
    • Depends on the enclosure and spacing, do not exceed 1Kg of force.

Lepton Gasket

In the News

CNX Software - $99 Lepton FS module cuts the cost of FLIR thermal cameras by half

FLIR Premium Partner

This Model: Lepton FS, 160×120 pixels, 57° with shutter - NOT Radiometric

Important Information

  • PureThermal 1/2/3/Mini/Pro with Radiometric FLIR Lepton 2.5, 3.5, 3.1R requires specialized software to show radiometry such as GetThermal.
  • All international customers that are ordering any Thermal Imaging Camera will be required to fill out an End Use Statement document before shipment. Once you place your order we will email you with the document within a few business days.
  • We can only ship FLIR Lepton to North America, Australia, Switzerland,  United Kingdom and the European Union Countries. Any orders with a FLIR Lepton with a delivery address other than those will be canceled and refunded. We are sorry for the inconvenience.
  • Number of non-defective pixels shall be >97% Adjacent clusters, rows, columns may contain defective pixels that are not factory corrected and unable to be corrected. 3% of operability failures allowed. Temperature compensation Automatic. Output image independent of camera temperature.
  • Lepton FS units are not guaranteed against any radiometric accuracy and users whom wish to use Lepton FS products for radiometric applications do so at their own risk. Teledyne FLIR and GroupGets will not support questions pertaining to calibrating Lepton FS units.
  • RoHS Certificate of Compliance European Directive No 2015/863
  • Declaration of Compliance REACH Regulation (EC) No. 1907/2006
  • California Proposition 65 Declaration
  • ECCN: CAM 6A993A
  • HTSUS: 9027.50.4020
  • Country of Origin: USA
  • Part Number: 500-0771-FS1

🕑Lead Time🕑

If you can add this item to your cart it is in stock and ready to ship

View full details