FLIR ADK 75° 60Hz GMSL1 (IN STOCK NOW)

The FLIR ADK™ is a cost-effective way to develop the next generation of automotive thermal vision for advanced driver assistance systems (ADAS) and autonomous vehicles (AV). Thermal infrared cameras are the best sensor technology for pedestrian detection, reliably classifying people in cluttered environments and giving analytics the critical information needed for automated decision making. The ADK’s rugged, IP67 rated enclosure incorporates a heated window for all-weather driving. 

Note: Only GMSL1 cameras work with the Ethernet BoB

See Clearly, Even in Challenging Lighting Conditions

Thermal sensors create images from heat, not light, so they can detect pedestrians and oncoming vehicles regardless of lighting conditions.

Next-Generation Thermal Vision is Plug-and-Play Easy

Start collecting thermal data in minutes.

Simple Interface Ports Data Directly into Analytics

Easy set-up, operation, and integration.

Specifications

Overview

• Pixel Pitch: 12 µm
  
• Spectral Band: 8-14 microns (LWIR)
  
• Thermal Sensitivity: < 50 mK
  
•  Weight: ~100 gm (3.5 oz)
• Camera Interface Options: GMSL1
  
• Data Format: Software-selectable: 16-bit TIFF (raw sensor format) or compressed 8-bit
  

Environmental

• Environmental Protection: IP67
  
• Environmental & Approvals
  
• Operating Temperature: -40°C to +85°C (-40°F to +185°F)
• Shock: 1,500 G @ 0.4 msec
• Imaging & Optical
  
• Array format: 640 × 512
  
• Frame Rate: Full Frame (30 & 60 Hz selectable)
• Sensor Technology: Boson™ – Uncooled VOx microbolometer
• Solar protection: Yes (sun will not damage sensor)

Physical

• Dimensions (W x H x D): 35 × 40 × 47 mm (1.38 × 1.57 × 1.8 in)

Power

• Power Consumption: 1 W (without heater); ~4 W average and 12 W maximum (with heater)
• Power Requirements: Camera: 5 VDC (USB2) or 24 VDC (GMSL); Window Heater: 12 VDC (USB2) or 24 VDC (GMSL)

Resources

• Datasheet
• User Manual
• Quick Start Guide
• GMSL driver for the NVIDIA Jetson AGX Xavier running JetPack4.3

Important Notes 

• Removal of the camera from the housing will invalidate the warranty.
  
• All international customers that are ordering any Thermal Imaging Camera will be required to fill out an End Use Statement document before shipment. Once you place your order we will send you an email with the documents.
• All US orders will get 60Hz cameras unless you contact us (help@groupgets.com)
• We can ship 60 Hz cameras to certain other countries but it will require some additional documents before shipment. See Export Control page.
  

Export Information

• ECCN 60/30Hz: 6A003.b.4.b
  
• HTSUS: 9013.80.9100
• Country of Origin: USA