FLIR ADK by TELEDYNE FLIR

Description

The FLIR ADK™ is a cost-effective way to develop the next generation of automotive thermal vision for advanced driver assistance systems (ADAS) and autonomous vehicles (AV). Thermal infrared cameras are the best sensor technology for pedestrian detection, reliably classifying people in cluttered environments and giving analytics the critical information needed for automated decision making. The ADK’s rugged, IP67 rated enclosure incorporates a heated window for all-weather driving. With the GMSL and USB interfaces, installation is plug-and-play easy.

Thermal Vision for Autonomous Vehicle Applications

See Clearly, Even in Challenging Lighting Conditions

Thermal sensors create images from heat, not light, so they can detect pedestrians and oncoming vehicles regardless of lighting conditions.

Next-Generation Thermal Vision is Plug-and-Play Easy

Start collecting thermal data in minutes.

Simple Interface Ports Data Directly into Analytics

Easy set-up, operation, and integration.

Specifications

Overview

Pixel Pitch: 12 µm

Spectral Band: 8-14 microns (LWIR)

Thermal Sensitivity: < 50 mK

Weight: ~100 gm (3.5 oz)

Camera Interface Options: USB, GMSL, Ethernet and FPD-link

Data Format: Software-selectable: 16-bit TIFF (raw sensor format) or compressed 8-bit

Environmental

Environmental Protection: IP67

Environmental & Approvals

Operating Temperature: -40°C to +85°C (-40°F to +185°F)

Shock: 1,500 G @ 0.4 msec

Imaging & Optical

Array format: 640 × 512

Frame Rate: Full Frame (30 & 60 Hz selectable), 9 Hz optional

Sensor Technology: Boson™ – Uncooled VOx microbolometer

Solar protection: Yes (sun will not damage sensor)

Physical

Dimensions (W x H x D): 35 × 40 × 47 mm (1.38 × 1.57 × 1.8 in)

Power

Power Consumption: 1 W (without heater); ~4 W average and 12 W maximum (with heater)

Power Requirements: Camera: 5 VDC (USB2) or 24 VDC (GMSL); Window Heater: 12 VDC (USB2) or 24 VDC (GMSL)

Resources

• Datasheet


• User Manual


• Quick Start Guide

Notes

• Removal of the camera from the housing will invalidate the warranty.
• All international customers that are ordering any Thermal Imaging Camera will be required to fill out an End Use Statement document before shipment. Once you place your order we will send you an email you with the documents.
• All US orders will get 60Hz cameras unless you contact us (help@groupgets.com)
• We can ship 60 Hz cameras to certain other countries (listed below) but it will require some additional documents before shipment. All other international orders will receive a 9Hz camera.
• The authorized export, reexport and transfer countries for 60Hz cameras are: Argentina, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Japan, Latvia, Lithuania, Luxembourg, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, South Korea, Spain, Sweden, Switzerland, Turkey, the United Kingdom.

🕑Lead Time🕑

Approximately 8-10 Weeks from when your order is placed. Your whole order will ship together.