Success flash icon

Error flash icon

Is there another way for the legacy Photon camera to accept an external sync using the PCI-1422?

This question applies to the legacy Photon camera models. The Photon product line and it accessories have been discontinued. The information here is provided for historical reference.

A custom cable could be developed by the customer that interfaces from the SAMTEC connector directly to the frame grabber, thus obviating the serial-in, parallel-out (SIPO) interface module limitations. This is necessary because there is no SYNC signal through the SIPO`s 15-pin connector. Such a cable would need to be bifurcated to provide a path for input power to the camera.

Back