Loading...Please wait one moment.
This campaign is no longer active and has not been relisted.
Brand / Manufacturer
Bluebird Labs LLC
Manufacturer Part #
The BattLab-One simulates standard battery voltages and captures the current consumption profile of your device. Then use the BattLab-One software to optimize battery life using “what-if” analysis.
Captures both active event and sleep current from 10uA to 500mA
Trigger input to capture firmware states and their impact on overall battery life
1kHz Sample rate, 16-bit delta sigma ADC
Long active event capture duration from seconds to hours
Low/no burden voltage across all ranges (BattLab-One provides PSU output)
Interactive/detailed active current plot Battery Simulation
MSP430 microcontroller-based device that simulates standard batteries for Li-Ion, LiFePO4, Alkaline, NiMh, NiCd
Provides voltages of 1.2V, 1.5V, 2.4V, 3.0V, 3.2, 3.6V, 3.7V, 4.5V at up to 450 mA, perfect for measuring your ESP8266 devices power demands
State of charge (SOC) curves and Cutoff voltage display
Battery Life Optimization
What-if “analysis to optimize the battery life of your product
Save profiles so you can compare your device under test (DUT) current profiles
Export captured data to CSV file
USB 2.0 Type B connection to PC
BNC Trigger Input to capture firmware events
USB power and data isolated from PSU output to avoid ground loops
Support for Windows 7,8,10
Open-source hardware and software
As the manufacturer of the BattLab-One I am trying to offer lower cost options for my customers.
One BattLab-One with enclosure
Campaign Funded, ends when minimum unit count reached
Factory Lead Time
Campaign discussion forums are intended for questions about the product such as specifications or to share ideas about applications. The campaign initiator or GroupGets may also send out important one-to-many updates on this channel. This is not the place for individual technical support inquiries. For help or questions about an order, please
submit a support ticket here.
We are proud to support
BattLab-One in reaching its goal.
GroupGets is a trusted platform to help companies and makers sell their products in bulk while getting individuals the best prices.
tCam-Mini Bundle Round 2
Save 20% compared to purchasing separately!
tCam-Mini is a small wireless streaming thermal imaging camera designed by Dan Julio.
tCam-Mini comes with a capable desktop...
HydroMoth is the latest product from the AudioMoth range and offers everything needed to start recording underwater sound for extended periods of time at depths of 30-60m....
The PyFive project was originally conceived as a libre silicon MCU capable of easily running Micropython/CircuitPython. It would host a VexRiscv processor and have...