HackHD PCB and f2.8 160° Lens
Progress
10 reserved of 10 minimum
Product Details
Name
HackHD PCB and f2.8 160° Lens
Brand/Manufacturer
HackHD
Mfr. Part #
HACKHD
Product Description
The HackHD camera is an excellent 1080p video camera using a 9MP sensor that can also take still images. It weighs only one ounce and is approximately 1x3 inches in size. The camera can easily be mounted virtually anywhere, and can even fit inside of the GoPro skeleton. It is powered by any 3.7-5 volt power source.
Here is a video from Edge Research Laboratory using this camera on a high altitude balloon.
Technical Specifications
- Resolution: 1080P HD Video / 5MP or 9MP Still Photo
- Frame Rate: 30 FPS (frames per second) Video
- Coding: H.264
- Aspect Ratio: 16:9
- File Format: AVI Video / JPG Photo
- Storage: External microSD or microSDXC card (Supports SDHC cards with adapter)
- Control Input: Single contact monetarily switch
- Video Output: Composite video 480P resolution
- Status Indicator Output: Single color LED driver
- Power Supply: External 3.7V, 1100mAH minimum. 5V safe.
- Low battery procedure: 3.6V indicates low battery by faster LED blinking, 3.4V stops recording/turns off
- Power Output: 3.7V DC, 500mAH
- Working Temperature: -10degC to +45degC
- Storage Temperature: -20degC to +70degC
- Weight: Aprox. 32 grams
Lens
- Lens: Interchangeable M12 Lens. Includes 2.5mm (EFL), F2.8, 160 degree (diagonal) wide angle lens
Sensor
- Manufacture: Omnivision
- Sensor Size Format: 1/2.3 inch
- Number of Pixels : 9 mega pixels
- Pixel size: 1.75um x 1.75um
- Sensitivity: 960mV/lux-sec
Dimensions
- Dimensions: 65mm x 40mm x 25mm LxWxH
Documents
Other
Why GroupGet?
This is the least expensive way to get the HackHD PCB with 2.5mm (EFL) F2.8 160 degree (diagonal) wide angle lens.
External Links
Manufacturer's product page
Purchase Information
Unit Deliverable
One HackHD PCB + 2.5mm (EFL) F2.8 160 degree (diagonal) wide angle lens.
Unit Price
$129.00
Campaign Part #
GG-P-93
Availability
Not available / campaign funded, end date: Sat, 09 May 2015 23:59:00 -0700
Factory Lead Time
Less than 7 days.
How it works
Featured | See All
AlienWhoop V2 Flight Controller (Round 2)
AlienWhoop flight controller for Tiny Whoop, Blade Inductrix, Eachine, BetaFPV, and other micro brushed quadcopter frames. Fully complete and hand assembled in the USA. Best in class flight control...
PureThermal 1 - Pro Kit+ (Round 6)
This is the essential kit by developers for developers to hack on the new radiometric FLIR Lepton 2.5 with an upgraded STM32F412 MCU with 2x the flash and RAM of the previous version, giving you 1M...
Wave One
Wave One is a low power IOT sub 1GHz sensor node, designed to operate for years on a small coin cell battery and solar power. The design is based around Texas Instrument's CC1310 wireless MCU capab...
Raspberry Pi 3 FLIR Lepton Development Kit
This popular Raspberry Pi Kit for the FLIR Lepton was developed by GroupGets long ago for the first ever FLIR Hackathon. It is now used in hackathons and research labs worldwide. This updated kit i...