Success flash icon

Error flash icon

This campaign is no longer active and has not been relisted.

Pi Knox

Single-unit price: $9.99 + $5.00 flat rate shipping

Not available / campaign end date: Thu, 21 Jan 2021 13:46:00 PST

Backers icon

Backers: 37

Target icon campaign show

Target: 50

Funded icon show

Funded: 95

  • Campaign Created
  • Campaign Reached Goal
  • Product Being Manufactured
  • Shipping to Customers

Product Details

Name

Pi Knox

Brand / Manufacturer

Burgduino

Manufacturer Part #

Pi Knox

Product Description

Raspberry Pi 2-channel Solid State Relay and PSU for 6-24 VDC Applications

Pi Knox does two things:

  1. Powers your Pi from a 6-24V power source... simple as that.
  2. Allows your Pi to control two loads from two GPIO powered from the same 6-24V source itself is powered through the Pi Knox. The current version can deliver up to 1.5A, combined, to the output channels

The production version for this campaign will have several improvements:

  1. Input reverse-polarity protection and on/off switch
  2. Choice of GPIO via switches 
    • OUT1-GPIO4/17
    • OUT2-GPIO22/27
  3. Output can deliver up to 3A combined or 3A on a single channel
  4. Choice of barrel jack or screw terminal for power connections

Pi Knox

Vin 6-24VDC/2.4A max
Vout 6-24VDC/3A max (shared between 2 channels)

  • OUT1-GPIO4/17
  • OUT2-GPIO22/27

Production version will be available with all components assembled, board tested, and loose connectors

Included you will receive a 40-pin stackable header and 3 screw terminals, plus 3 barrel jacks to solder so you can choose the one that fits your application best (or perhaps use a barrel jack for input and screw terminals for output etc.)

Why GroupGets?

Help keep the cost low!


Purchase Information

Unit Deliverable

ONE (-1-) PCB will all components except connectors soldered, tested + ONE (-1-) 40 pin stackable header + THREE (-3) BARREL JACKS + THREE(-3-) SCREW TERMINALS

Unit Price

$9.99

Campaign Part #

GG-P-890

Availability

Not available / campaign funded, end date: Thu, 21 Jan 2021 13:46:00 PST

Factory Lead Time

60 Days

Campaign discussion forums are intended for questions about the product such as specifications or to share ideas about applications. The campaign initiator or GroupGets may also send out important one-to-many updates on this channel. This is not the place for individual technical support inquiries. For help or questions about an order, please log a ticket here: Support

  • Lzmvgozl normal
    Burgduino

    Campaign goal changed to 50pcs... This is my first GroupGets project and despite the fact it will cost me more to make a batch especially with recent improvements, i want to thank everybody interested to it and make as many as possible...

    Post last edited: 7 months ago

  • Lzmvgozl normal
    Burgduino

    Covid and shipping dont go well together as most people already know.. for some of us depending on the country we live in and its own conditions for lockdown and shipping company status, things can be even more difficult.
    PCB & components for Pi-Knox ordered about 10 days after campaign ended successfully thanks to all of you, but so far i have only received the pcb and those after 5 months delay.. components are still showing stuck in some depot in Athens with no idea when they will be processed and go through customs so i can finally start assembling your Pi-Knox..

  • Lzmvgozl normal
    Burgduino

    I have managed to assemble the first Pi-Knox though using components from the prototypes i made earlier and parts from stock.. its a bit inferior in capabilities as i cannot exceed 12V for testing and had to improvise (ie replaced fuse with a simple diode and instead of 2.4A buck converter used the 1.8A i had -pin compatible ICs-) but the design is solid and works perfectly fine and is absolutely sure to work within the specs when assembled with the right parts.

Featured Campaigns

Audiomoth Dev

Active

Funded
164%

Target
100

Price
$79.99

AudioMoth Dev is the development version of the acoustic monitoring device AudioMoth® version 1.2.0 . This full-spectrum acoustic development board is based on the Gec... View Campaign

DIY-Thermocam V3 (Round 3)

Active

Funded
20%

Target
10

Price
$279.00

The DIY Thermocam Version 3 has been redesigned to offer 3x the performance of the predecessor, making thermal imaging much more accessible and fun! The aim of this proje... View Campaign

BattLab-One (Round 2)

Active

Funded
10%

Target
10

Price
$81.67

The BattLab-One simulates standard battery voltages and captures the current consumption profile of your device. Then use the BattLab-One software to optimize battery life... View Campaign