Success flash icon

Error flash icon

This campaign is no longer active and has not been relisted.
LoStik by Ronoth - LoRa/LoRaWAN (Round 2)

LoStik by Ronoth - LoRa/LoRaWAN (Round 2)

Single-unit price: $39.00 + shipping

Not available / campaign end date: Fri, 10 Apr 2020 23:39:00 PDT

Backers icon

Backers: 0

Target icon campaign show

Target: 10

Funded icon show

Funded: 0

Product Details


LoStik by Ronoth - LoRa/LoRaWAN (Round 2)

Brand / Manufacturer

Ronoth, LLC

Manufacturer Part #


Product Description

LoStik by Ronoth is an affordable, easy to use, LoRaWAN™ compatible device. It lets IoT (Internet of Things) integrators, network testers, and hobbyists get connected to LoRa® networks faster, diagnose network issues more easily, and build new and exciting connected devices.



LoRa® technology is one of the leading wireless technologies powering the emerging Internet of Things. It is used in tons of cool technologies such as automatic meter reading, smart parking, and even livestock tracking. It has the unique ability to send packets over fairly long distances using minimal power (We're talking kilometers!). LoRa® technology is perfect for devices that are located far away and need to send small amounts of data.


Unfortunately, configuring and deploying these devices can be more challenging than it needs to be. Setting up and testing new networks can also be tiresome and complex. That's where our device comes in.


Who Needs It and Why?

LoStik technology is ideal for anyone working with existing LoRa® networks or just getting started in IoT. It utilizes the RN2903/RN2483 SOM (System on a Module) chip by Microchip which comes with an intuitive text interface. Just plug your device in to a computer and connect via terminal to start coding or check out some of our example code.


Hobbyists can connect their Raspberry Pi or PC to any LoRa® gateway and start sending messages or sensor data with minimal fuss or configuration. There is no easier way to get connected to a LoRaWAN™ network. LoStik is ideal for connecting your Raspberry Pi, BeagleBone, or any PC to the LoRaWAN™ network. It connects over USB leaving your precious Raspberry PI GPIO pins free. If you’re looking to build an automated backyard garden, DIY home automation, or a garage door opener, LoStik can help you out.


IoT integrators can use LoStik to test and configure networks without carrying around development boards and random programmers, serial adapters, and wires.


LoRa® wireless technology is used in tons of industries and use-cases including:


  • Cattle farming - Tracking herd movement, location, body temperature, and local humidity
  • Vineyards - Soil moisture, humidity, temperature, and weather conditions

No matter what your use-case is LoStik wireless networks is an essential tool for any IoT integrator.


Key Features

Works with any PC, Raspberry Pi, or BeagleBone

Simple ASCII interface

Backpack friendly (compare to a dev boards and jumper wires)

Supports Packet mode LoRa® (packet mode) or LoRaWAN™

Compatible with The Things Network

Based on the RN2903/R2483 by Microchip

Two user-programmable LEDs

Open source



  • Connectivity: USB 2.0
  • Power Consumption: 140 ma typical TX, 20 ma idle (with power LED)
  • Dimensions: 80 mm x 25 mm x 12 mm (without antenna)
  • Receiver Sensitivity: down to -146 dBm
  • TX Power: adjustable up to +18.5 dBm
  • Range: up to 15 km coverage in suburban and up to 5 km coverage in urban areas


Technical Details

Radio & MCU

Ronoth USB Dongle for LoRa® wireless networks uses a RN2903 (US) or RN2483 (EU) depending on what ITU region you are in; if you are unsure which version you need check out the frequency plan.


LoStik uses a simple ASCII interface. You can configure it and send commands over serial / COM port. Microchip provides a detailed command reference RN2903, RN2483


The radio can be used in packet mode sending packets between nodes. This provides simplex, single-channel communications. If you want to speak LoRaWAN you need a gateway or access to one. Some countries in Europe provide nation-wide coverage.


If you want to tinker with the MCU directly it is possible (but not necessary) to write your own firmware. There is an unpopulated ICSP header and the onboard MCU is a PIC18LF46K22 and Microchip supplies LoRaWAN libraries for use with MPLab.



We chose a great enclosure to protect the internals when it’s bouncing around your computer bag. It’s semi-transparent so you can see the LEDs, but more importantly it’s meant to be hack friendly and you can take it apart without destroying it. The LoRaWAN modules are capable of firmware updates over the USB / UART connection, but if you’re feeling adventurous we included pads for an ICSP header.



During checkout, please select the version of LoStik that you would like (915Mhz or 868Mhz)

Why GroupGets?

To offer one-time wholesale pricing to the public.

External Links

Manufacturer product page

Purchase Information

Unit Deliverable

LoStik Unit and antenna

Unit Price


Campaign Part #



Not available / campaign unsuccessful, end date: Fri, 10 Apr 2020 23:39:00 PDT

Factory Lead Time

0 Days

Options and Add-Ons

915Mhz US, Canada, South America and Australia Version


Select this if you would like the US, Canada, South America and Australia Version version

868Mhz EU Version


Select this if you would like the EU version

Campaign discussion forums are intended for questions about the product such as specifications or to share ideas about applications. The campaign initiator or GroupGets may also send out important one-to-many updates on this channel. This is not the place for individual technical support inquiries. For help or questions about an order, please log a ticket here: Support

  • Avatar

    I have just created the GroupGet for LoStik by Ronoth - LoRa/LoRaWAN (Round 2)!

    Post last edited: over 1 year ago

Featured Campaigns

VGADuino-II, a Graphic Card for Arduino





What is VGADuino: VGADuino is a shield that is made for arduino with all the libraries and samples that the user can easily stack on the arduino board and start programmi... View Campaign

Wave III - Stereo Audio Player / Recorder module





Wave III is a two channel Stereo Audio Recorder and Player module with FAT File System support. Imagine you want to make a device that plays different alarm voices or you... View Campaign

Pick-N-Place Wheel





The Pick-N-Place Wheel is a complete solution for manual PCB assembly, component indexing and component storage. The Pick-N-Place Wheel is designed to help you makers out... View Campaign