After wildfires have ravaged parts of the USA and smog has loomed in our skies it’s become more important than ever to make sure you’re breathing clean air. Some folks may just go by an air purifier. But, how do you know it works? How do you know if it’s powerful enough to protect your whole space?
Like a scientist, you can test it with the Air Quality Wing for Particle Mesh.
What is it?
Air Quality Wing for Particle Mesh is an all-in-one air quality sensor for Particle and Feather based development boards (development board not included). It brings together a trio of sensors to give you as many data points as possible. That way, there won’t be anything missing when you go to measure the air inside your home or workplace.
Here’s what’s on board:
The most important sensor is theHoneywell HPMA115S0 dust sensor(available as a purchase option). This sensor counts the concentration of potentially harmful particulates in the air. It can detect both large particles 10µm in diameter and smaller ones less than 2.5µm in diameter. These readings are known as PM10 and PM2.5 respectively.
Sensing Volatile Compounds
Second to that, is the AMS CCS811. This senses volatile organic compounds and eC02. These types of readings are useful in places where there may be combustion. (Think stoves, furnaces, etc) It can act as an early warning mechanism. That way you stay safe, happy and healthy!
Temperature and Humidity
Finally, the Silicon Labs Si7021temperature and humidity sensor. These readings can be used on their own. Additionally they’re used by the CCS811 to compute an accurate TVOC and C02.
Flexible Power Sources
No outlet nearby where you want to measure? No problem!
You can easily plug in almost any lithium polymer battery to your Particle or Feather based board and use it immediately. Air Quality Wing for Particle Mesh has extra circuitry that allow you to use either USB or battery power. How great is that?
What are people saying about it?
I have a similar setup I build with sensors off Adafruit and have been thinking of designing my own PCBA to integrate all of them, this saves me the time! Thank you!- Nicholas J
Thank you for integrating them on a single Featherwing format!- D
I love what you did to measure the air quality. -C
In order to keep the product cost low, manufacturing requires a minimum order.
Campaign funded, scheduled end date:
Sat, 26 Oct 2019 08:05:00 PDT
Factory Lead Time
The seller will handle the shipment of orders for this product.
Options and Add-Ons
Honeywell HPMA115S0 Air Quality & Dust Sensor
TheHoneywell HPMA115S0 dust sensortells you how many micrograms of material is floating around in a cubic volume of space. The Particle Squared was designed to be used with this exact sensor.
I have just created the GroupGet for Air Quality Wing for Particle Mesh!
Post last edited: 3 months ago
I'm sure I could look up the datasheets and compare myself, but I was wondering if you knew if the HPMA115S0 pinout is compatible with any of the Plantower sensors like the pms5003 or pms7003. I've got a couple of those already and would love to put them to use.
They appear not to be 100% pin compatible. The cables are quite easy to swap though. The connector looks similar but I don't have one of these devices on hand so you may want to double check yourself.
Here's the Digikey part number for the cable end:
And for the connector itself:
Thanks for the quick response Jared!
Any news of when the AQ Wing will ship?
I think there was an issue with your payment. I'll get you in contact with the team @ Groupgets to fix it.
Post last edited: about 1 month ago
thanks got the email :-)
We are proud to support Air Quality Wing for Particle Mesh in reaching it's goal. Once the target has been reached the product will be distributed to all backers. Don't miss out on becoming a backer!