Single-unit price: $9.99 + shipping
Not available / campaign end date: Thu, 13 Jun 2019 11:00:00 PDT
Bi-Directional Voltage Level Shifter - RT-NVT2008
This is a voltage level shifter/translator. It is capable of connecting the SPI/I2C communication buses or digital signals with different voltage standards. I.e. you can connect the 5V logic Arduino to 3.3V/1.8V logic sensors or to connect 3V3 IO of Digilent Analog Discovery to 1.8V/5V sensors. This board has 8 bidirectional digital channels, SOT23-5 LDO voltage regulator for low side voltage and LEDs indicating supply voltages (low and high voltage).
Voltage regulator can be used as power supply for connected sensor.
Permitted voltage difference between devices is limited by equation (VREF_B - VREF_A)>= 1V. Where VREF_B is external supply voltage, VREF_A is the LDO regulator voltage.
Table 1. Choosing the LDO voltage.
This board have an optional RA and RB 0402 pull-up resistors. More one choosing proper value of the pull-up resistors can be found in NVT2008 Datasheet. We assemble 1k Ohm RB resistors for you.
This RT-NVT2008 has assembled fixed voltage regulator in the SOT23-5 package depend on your choise. You can switch freely LDOs according to table 1.
Example of using the RT-NVT2008.
Product page: robothings.pl
We are running Groupgets campaign to meet you with our simple great tool and run a small production batch of it.
You receive RT-NVT2008 with selected LDO and 2 pcs. of 2.54mm pin headers.
Not available / campaign unsuccessful, end date: Thu, 13 Jun 2019 11:00:00 PDT
GroupGets will handle the shipment of orders for this product.
Select, if you want the RT-NVT2008 with 3.3V LDO. This will let you to connect the 5V system with the 3.3V system.
Select, if you want the RT-NVT2008 with 2.5V LDO. This will let you to connect the 5-3V system with the 2.5V system.
Select, if you want the RT-NVT2008 with 1.8V LDO. This will let you to connect the 5-2.2V system with 1.8V system.
Select, if you have your own SOT235 LDO.