LoStik by Ronoth - LoRa/LoRaWAN

Name

LoStik by Ronoth - LoRa/LoRaWAN

Brand / Manufacturer

Ronoth, LLC

Manufacturer Part #

RTH-LOSTIK

Product Description

LoStik by Ronoth is an affordable, easy to use, LoRaWAN™ compatible device. It lets IoT (Internet of Things) integrators, network testers, and hobbyists get connected to LoRa® networks faster, diagnose network issues more easily, and build new and exciting connected devices.

Overview

LoRa® technology is one of the leading wireless technologies powering the emerging Internet of Things. It is used in tons of cool technologies such as automatic meter reading, smart parking, and even livestock tracking. It has the unique ability to send packets over fairly long distances using minimal power (We're talking kilometers!). LoRa® technology is perfect for devices that are located far away and need to send small amounts of data.

Unfortunately, configuring and deploying these devices can be more challenging than it needs to be. Setting up and testing new networks can also be tiresome and complex. That's where our device comes in.

Who Needs It and Why?

LoStik technology is ideal for anyone working with existing LoRa® networks or just getting started in IoT. It utilizes the RN2903/RN2483 SOM (System on a Module) chip by Microchip which comes with an intuitive text interface. Just plug your device in to a computer and connect via terminal to start coding or check out some of our example code.

Hobbyists can connect their Raspberry Pi or PC to any LoRa® gateway and start sending messages or sensor data with minimal fuss or configuration. There is no easier way to get connected to a LoRaWAN™ network. LoStik is ideal for connecting your Raspberry Pi, BeagleBone, or any PC to the LoRaWAN™ network. It connects over USB leaving your precious Raspberry PI GPIO pins free. If you’re looking to build an automated backyard garden, DIY home automation, or a garage door opener, LoStik can help you out.

IoT integrators can use LoStik to test and configure networks without carrying around development boards and random programmers, serial adapters, and wires.

LoRa® wireless technology is used in tons of industries and use-cases including:

• Cattle farming - Tracking herd movement, location, body temperature, and local humidity
• Vineyards - Soil moisture, humidity, temperature, and weather conditions

No matter what your use-case is LoStik wireless networks is an essential tool for any IoT integrator.

Key Features

Works with any PC, Raspberry Pi, or BeagleBone

Simple ASCII interface

Backpack friendly (compare to a dev boards and jumper wires)

Supports Packet mode LoRa® (packet mode) or LoRaWAN™

Compatible with The Things Network

Based on the RN2903/R2483 by Microchip

Two user-programmable LEDs

Open source

Specifications

• Connectivity: USB 2.0
• Power Consumption: 140 ma typical TX, 20 ma idle (with power LED)
• Dimensions: 80 mm x 25 mm x 12 mm (without antenna)
• Receiver Sensitivity: down to -146 dBm
• TX Power: adjustable up to +18.5 dBm
• Range: up to 15 km coverage in suburban and up to 5 km coverage in urban areas

Technical Details

Radio & MCU

Ronoth USB Dongle for LoRa® wireless networks uses a RN2903 (US) or RN2483 (EU) depending on what ITU region you are in; if you are unsure which version you need check out the frequency plan.

LoStik uses a simple ASCII interface. You can configure it and send commands over serial / COM port. Microchip provides a detailed command reference RN2903, RN2483

The radio can be used in packet mode sending packets between nodes. This provides simplex, single-channel communications. If you want to speak LoRaWAN you need a gateway or access to one. Some countries in Europe provide nation-wide coverage.

If you want to tinker with the MCU directly it is possible (but not necessary) to write your own firmware. There is an unpopulated ICSP header and the onboard MCU is a PIC18LF46K22 and Microchip supplies LoRaWAN libraries for use with MPLab.

Enclosure

We chose a great enclosure to protect the internals when it’s bouncing around your computer bag. It’s semi-transparent so you can see the LEDs, but more importantly it’s meant to be hack friendly and you can take it apart without destroying it. The LoRaWAN modules are capable of firmware updates over the USB / UART connection, but if you’re feeling adventurous we included pads for an ICSP header.

IMPORTANT NOTE

During checkout, please select the version of LoStik that you would like (915Mhz or 868Mhz)

Links

External Website

Unit Deliverable

LoStik Unit and antenna

Unit Price

$36.30

Availability

Not available / campaign Funded, end date: Fri, 21 Jun 2019 23:59:00 PDT

Lead Time

10 Days

915Mhz US, Canada, South America and Australia Version

$0.00

Select this if you would like the US, Canada, South America and Australia Version version

868Mhz EU Version

$0.00

Select this if you would like the EU version

6dbi Antenna Upgrade - 915mhz (America)

$6.00

Offers increased transmit and recieve sensitivity over the stock 2dbi stub antenna.

6dbi Antenna Upgrade - 868mhz (Europe)

$6.00

Offers increased transmit and recieve sensitivity over the stock 2dbi stub antenna.