900MHz Explorer Board for Edison (Round 2)
Progress
7 reserved of 5 minimum
Limited quantity of
22 available!
Product Details
Name
900MHz Explorer Board for Edison
Brand/Manufacturer
Enhanced Radio Devices LLC
Mfr. Part #
EXPLORE900-E
Product Description
The 900MHz Explorer board is an adapter board for the the Intel Edison development board. The Explorer board can communicate over sub 1-GHz frequencies using digital modes, allowing you to collect data from (and control) the wireless devices around you. Since the Edison runs Linux, you can write your RF software in any language you want. Our fully featured Python libraries will get you started quickly, and we support common Open Source rf libraries such as rfcat.
The Explorer board is fully open-source, and we're actively building out our example projects. We're making it easy to connect to the 900MHz devices you already have, like Z-Wave, sub-1GHz Zigbee, and custom protocols.
Note - this is an older version of the design that is not intended for #OpenAPS
Project Ideas:
- Use rfcat to detect nearby 868MHz/915MHz devices and interact with them
- Create a Bluetooth to 915MHz bridge that fits in your pocket
- Send text over the 900MHz band, without cellular service
- Communicate with Z-Wave devices
- Create a 900MHz Zigbee to WiFi adapter
- Read data off of wearable health and fitness monitors
Specifications:
- General purpose ISM band transceiver
- 915MHz US ISM and 868MHz EU License Exempt
- Versatile wireless development board for prototyping
- Up to 10dBm output power (10 mW)
- Receive sensitivity as low as -110dBm
- Up to 500kBaud data rate
- On board trace antenna
- UMCC antenna connector for external power amplifier and/or antenna
- Usable with Intel Edison or stand-alone
- Includes USB Host and UART ports for Edison
- Intel Edison Library controls frequency, transmission control, communications protocol and more
- On-board LiPo battery charger
- Open hardware design
Intel Edison Software Library: https://github.com/EnhancedRadioDevices/915MHzEdisonExplorer_SW
rfcat port: https://github.com/EnhancedRadioDevices/rfcat
CC111x Firmware: https://github.com/EnhancedRadioDevices/subg_rfspy
Open Hardware Design Files: https://github.com/EnhancedRadioDevices/915MHzEdisonExplorer
(Intel Edison Module not included)
Why GroupGet?
These boards were leftover from Round 1 back in Jan and we're doing some spring cleaning to make room on the shelves for new stuff.
External Links
Manufacturer's product page
Purchase Information
Unit Deliverable
You will receive one (1) 900MHz Explorer board, assembled and ready to connect to your Intel Edison
Unit Price
$59.00
Campaign Part #
GG-P-312
Availability
Campaign funded, scheduled end date: Tue, 16 May 2017 01:05:09 -0700
Factory Lead Time
Two Weeks
Options and Add-Ons
Intel EDI2.SPON.AL.S Edison Compute Module
$64.99
Designed for expert makers, entrepreneurs, and some industrial IoT applications, the Intel® Edison compute module provides ease-of-development for a range of prototyping projects or commercial ventures when performance matters.
Coaxial SMA to UMCC Female
$11.99
Cable Assembly Coaxial SMA to UMCC Female to Female 1.37mm OD Coaxial Cable 7.87" (200mm)
824MHz ~ 960MHz Antenna
$16.99
892MHz, 1.9GHz CDMA, GSM, UMTS Whip, Tilt RF Antenna 824MHz ~ 960MHz, 1.71GHz ~ 2.17GHz 2dBi, -0.1dBi Connector, SMA Male Connector Mount
s7rubicon - Orange - Shallow Cover
$44.00
Rubicon is a modular enclosure system specifically designed to help deploy and protect your projects in style. It is IP67 water- and dustproof, supports glands and conduit fittings and is designed to be installed just about anywhere.
The baseplate of this Rubicon Accessory is modified to line up with the explorer board's holes.
Get more information on the Rubicon Product Page here
+and+make+it+a+success!)
How it works
900MHz Explorer Board for Edison
The 900MHz Explorer board is an adapter board for the the Intel Edison development board. The Explorer board can communicate over sub 1-GHz frequencies using digital modes, allowing you... (continued)
Featured | See All
Wave One
Wave One is a low power IOT sub 1GHz sensor node, designed to operate for years on a small coin cell battery and solar power. The design is based around Texas Instrument's CC1310 wireless MCU capab...
DIY-Thermocam (Round 5)
The DIY-Thermocam is a do-it-yourself infrared camera kit targeted at the FLIR Lepton 3.0 160x120 LWIR camera core and the Teensy 3.6 ARM Cortex M4 MCU breakout. It also has recently updated softwa...
Grid-EYE Thermal Camera PUREmodule (round 2)
The Panasonic "Grid-EYE" is an 8x8 pixel thermal infrared camera core with a digital I2C output for thermal presence, direction, and temperature values. The built-in lens includes a 60˚ viewing ang...
Raspberry Pi 3 FLIR Lepton Development Kit
This popular Raspberry Pi Kit for the FLIR Lepton was developed by GroupGets long ago for the first ever FLIR Hackathon. It is now used in hackathons and research labs worldwide. This updated kit i...