Single-unit price: $119.00 free shipping
Campaign ends when minimum unit count is reached
Z-turn Board XC7Z020 (Round 2)
Boot Linux from a state-of-the-art Xilinx FPGA right out of the box. Z-turn is a high-performance SBC built around the Xilinx Zynq-7020 featuring a dual-core ARM Cortex-A9 processor and Xilinx 7-series FPGA fabric. The Z-turn Board takes full advantage of all of the features that the Zynq-7020 SoC has to offer. It has 1GB DDR3 and 16MB QSPI Flash on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 106 user I/O and configurable as up to 39 LVDS pairs I/O. #### FREE SHIPPING, US ONLY ###Features SOC * Xilinx XC7Z020-1CLG400C (Zynq-7020) * Up to 667MHz ARM dual-core Cortex-A9 MPCore processor * Integrated Artix-7 class FPGA subsystem with 85K logic cells, 53,200 LUTs, 220 DSP slices * NEON & Single / Double Precision Floating Point for each processor * Supports a Variety of Static and Dynamic Memory Interfaces Memory * 1GB DDR3 SDRAM (2 x 512MB, 32-bit) * 16MB QSPI Flash * Micro SD Card Interface Communications * 1 x 10/100/1000M Ethernet * 1 x CAN * 1 x Mini USB2.0 OTG * 1 x USB-UART debug interface Display * 1 x HDMI (supports 1080p resolution) User I/O * Brought out via two 1.27mm pitch 80-pin SMT female connectors * 106 user I/O * Configurable 39 LVDS pairs I/O Dimensions * 63mm x 102mm x 1.6mm (8-layer PCB design) Power supply * USB power supply or DC 5V/2A Other * Onboard three-axis acceleration sensor and temperature sensor * 1 x 2.54mm pitch 14-pin JTAG interface * 2 x Buttons (1x Reset, 1 x User) * 4-channel toggle switch * 5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED) * 1 x Buzzer * Board Overview PDF #### FREE SHIPPING, US ONLY
In single quantity the shipping is expensive from Shenzen. We are taking that out of the equation with this GroupGet.
One Z-turn Board XC7Z020, 4GB Micro SD Card with Linux 3.15.0 preloaded, and product disk
Campaign unsuccessful, ends when minimum unit count reached
Two Weeks Days
The Z-turn IO Cape is an IO extension board designed specially for the Z-turn Board which adds many peripherals and signals like ADC, GPIO, LCD and camera interfaces to help you explore more functions from the Z-turn Board.
The MY-LCD43TP 4.3 inch LCD Module is designed to work with MYIR's ARM development boards and single board computers. It has one 4.3 inch TFT LCD including touch screen with 480 by 272 pixels resolution. MYIR has designed a special LCD adapter board to drive the display and enable touch features. One 50-pin IDC cable or 50-pin FPC cable is also provided to connect the LCD adapter board and MYIR's development board or single board computer. User can experience the high-performance of MYIR's board products through touching and watching the MY-LCD43TP.
The MY-LCD70TP 7 inch LCD Module is designed to work with MYIR's ARM development boards and single board computers. It has one 7 inch TFT LCD including resistive touch screen with 800 by 480 pixels resolution. MYIR has designed a special LCD adapter board to drive the display and enable touch features. One 50-pin cable is also provided to connect the LCD adapter board and MYIR's development board or single board computer. User can experience the high-performance of MYIR's board products through touching and watching the MY-LCD70TP.
The MY-CAM001U USB Digital Camera Module is released by MYIR specially for working on MYIR's ARM development boards. It is connected with the boards through USB2.0 Host port and supports resolution up to 1280 by 1024 pixels. It is using a CMOS image sensor which is a 1.3MegaPixel digital camera. The module is measuring only 60mm by 8mm with small form factor, low power consumption, high performance which can be used in various products.
This adds the foilowing:
Campaign discussion forums are intended for questions about the product such as specifications or to share ideas about applications. The campaign initiator or GroupGets may also send out important one-to-many updates on this channel. This is not the place for individual technical support inquiries. For help or questions about an order, please log a ticket here: Support