This campaign is no longer active and has not been relisted.

Z-turn Board XC7Z020

Z-turn Board XC7Z020
new

Progress

100% Funded
100% Funded
5 Backers
Ended 4 Months Ago
$119.00
free shipping
Buy Disabled
5 reserved of 5 minimum

Product Details

Name
Z-turn Board XC7Z020
Brand/Manufacturer
MYIR Tech
Mfr. Part #
MYS-7Z020-C-S
Product Description

Boot Linux from a state-of-the-art Xilinx FPGA right out of the box. Z-turn is a high-performance SBC built around the Xilinx Zynq-7020 featuring a dual-core ARM Cortex-A9 processor and Xilinx 7-series FPGA fabric.

The Z-turn Board takes full advantage of all of the features that the Zynq-7020 SoC has to offer. It has 1GB DDR3 and 16MB QSPI Flash on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 106 user I/O and configurable as up to 39 LVDS pairs I/O.

FREE SHIPPING, US ONLY

Myir board image

Features

SOC
* Xilinx XC7Z020-1CLG400C (Zynq-7020)
* Up to 667MHz ARM dual-core Cortex-A9 MPCore processor
* Integrated Artix-7 class FPGA subsystem with 85K logic cells, 53,200 LUTs, 220 DSP slices
* NEON & Single / Double Precision Floating Point for each processor
* Supports a Variety of Static and Dynamic Memory Interfaces

Memory

  • 1GB DDR3 SDRAM (2 x 512MB, 32-bit)
  • 16MB QSPI Flash
  • Micro SD Card Interface

Communications

  • 1 x 10/100/1000M Ethernet
  • 1 x CAN
  • 1 x Mini USB2.0 OTG
  • 1 x USB-UART debug interface

Display

  • 1 x HDMI (supports 1080p resolution)

User I/O

  • Brought out via two 1.27mm pitch 80-pin SMT female connectors
  • 106 user I/O
  • Configurable 39 LVDS pairs I/O

Dimensions

  • 63mm x 102mm x 1.6mm (8-layer PCB design)

Power supply

  • USB power supply or DC 5V/2A

Other

  • Onboard three-axis acceleration sensor and temperature sensor
  • 1 x 2.54mm pitch 14-pin JTAG interface
  • 2 x Buttons (1x Reset, 1 x User)
  • 4-channel toggle switch
  • 5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED)
  • 1 x Buzzer
  • Board Overview PDF

Dimensions

FREE SHIPPING, US ONLY

Why GroupGet?

In single quantity the shipping is expensive from Shenzen. We are taking that out of the equation with this GroupGet.

Purchase Information

Unit Deliverable
One Z-turn Board XC7Z020, 4GB Micro SD Card with Linux 3.15.0 preloaded, and product disk
Unit Price
$119.00
Campaign Part #
GG-P-214
Availability
Campaign funded, scheduled end date: Fri, 03 Mar 2017 09:22:37 -0800
Factory Lead Time

Two Weeks

Options and Add-Ons

Z-turn IO Cape

$35.00

The Z-turn IO Cape is an IO extension board designed specially for the Z-turn Board which adds many peripherals and signals like ADC, GPIO, LCD and camera interfaces to help you explore more functions from the Z-turn Board.

Cape Image

4.3-inch LCD Module

$60.00

The MY-LCD43TP 4.3 inch LCD Module is designed to work with MYIR's ARM development boards and single board computers. It has one 4.3 inch TFT LCD including touch screen with 480 by 272 pixels resolution. MYIR has designed a special LCD adapter board to drive the display and enable touch features. One 50-pin IDC cable or 50-pin FPC cable is also provided to connect the LCD adapter board and MYIR's development board or single board computer. User can experience the high-performance of MYIR's board products through touching and watching the MY-LCD43TP.

Smaller LCD

7-inch LCD Module

$99.00

The MY-LCD70TP 7 inch LCD Module is designed to work with MYIR's ARM development boards and single board computers. It has one 7 inch TFT LCD including resistive touch screen with 800 by 480 pixels resolution. MYIR has designed a special LCD adapter board to drive the display and enable touch features. One 50-pin cable is also provided to connect the LCD adapter board and MYIR's development board or single board computer. User can experience the high-performance of MYIR's board products through touching and watching the MY-LCD70TP.

Large LCD

USB Camera Module

$29.00

The MY-CAM001U USB Digital Camera Module is released by MYIR specially for working on MYIR's ARM development boards. It is connected with the boards through USB2.0 Host port and supports resolution up to 1280 by 1024 pixels. It is using a CMOS image sensor which is a 1.3MegaPixel digital camera. The module is measuring only 60mm by 8mm with small form factor, low power consumption, high performance which can be used in various products.

Camera

Kit Upgrade

$40.00

This adds the foilowing:

  • One 1.5m cross Ethernet cable
  • One 1.5m Mini USB2.0 cable
  • One Mini USB OTG Data cable
  • One HDMI cable
  • One 5V/2A Power adapter

How it works

This is a group buy campaign that needs to acquire at least the stated minimum amount of pledges from backers like you before the Unit Deliverable and any Add-Ons ship. We do not charge anyone until the Progress above hits 100% or greater, otherwise there is no charge. All campaign products are vetted as existing and functional so your order will be fulfilled within the Factory Lead Time if the campaign succeeds. Please see our FAQ page for more details on our billing process.
MORE

  • Photo
    Tony Kao

    Are there any updates on when the boards will ship?

  • 9zi7mnmg normal
    GroupGets

    Hi Tony. We shipped the US ones already and just got your international shipping payment today. Your order will go out early next week.

    Post last edited: 3 months ago