Audiomoth GPS + GLONASS Bundle

Name

Audiomoth GPS + GLONASS Bundle

Brand / Manufacturer

Open Acoustic Devices

Product Description

Coinciding with the release of the new AudioMoth GPS Board, this small bundle campaign offers everything needed to start recording sound with millisecond timestamp precision. This campaign includes the 'D' model 99 acquisition-channel GPS + GLONASS receiver.

Limit 5 Per Customer

The 'S' model  66 acquisition-channel GPS receiver is available here. Note that the 'S' bundle uses the PA1616S module which processes only GPS satellite signals. This offers slightly less robust position estimates but with lower energy consumption.

Included in the bundle

• Audiomoth Dev 
• AudioMoth GPS Board
• 2 pin and 4 pin JST-PH jumper cables to connect the two boards

GPS Board Features

• Time setting from GPS (PA1616D)
• 33 tracking/ 99 acquisition-channel GPS / GLONASS receiver
• GPS Consumption current(@3.3V):
• Acquisition: 34mA Typical
• Tracking: 29mA Typical
• Delayed start with magnetic reed switch 
• Start and stop recording with magnet (ideal for controlling the device when inside an enclosure)
• Module datasheet: https://www.cdtop-tech.com/products/pa1616d
• Application note: https://github.com/OpenAcousticDevices/Application-Notes/blob/master/Using_the_AudioMoth_GPS_Board/Using_the_AudioMoth_GPS_Board.pdf

AudioMoth Dev Features

• Silicon Labs Wonder Gecko microcontroller
• 48MHz 32-bit processor
• DSP instruction support and floating-point unit
• 256kB Flash
• 32kB RAM plus an extra 256kB of external SRAM
• On-board analog MEMS microphone, Sensitivity -38 dBV/Pa, 63 dBA SNR, 10Hz to 192kHz 
• Sample rates up to 384kHz
• 3.5 mm jack socket for external electret condenser microphones 
• Micro-USB B port for power, configuration and for reprogramming the Flash
• 5 separate JST-PH style headers for board-board/board-case integration
• 2pin JST-PH header for connecting external power supplies (3.3V to 6V)
• 2pin JST-PH header for powering external 3V boards or products from AudioMoth Dev – 3pin JST-PH header for external red and green LED’s
• 3pin JST-PH header for an external switch
• 4pin JST-PH header for multi-function 3V General Purpose I/O (GPIO)
• 6-pin serial wire debug port
• MicroSD card connector 
• Datasheet: GitHub - Audiomoth Dev Datasheet

Note:

• No batteries or battery holder included
• All versions of AudioMoth firmware and apps are compatible with all hardware versions.
• The AudioMoth GPS Board and AudioMoth Dev bundle is not compatible with the AudioMoth IPX7 Case.

Unit Deliverable

One AudioMoth Dev 1.0.0, one AudioMoth GPS D Board, and one of each 2 pin and 4 pin JST-PH jumper cables

Unit Price

$149.98

Availability

Campaign Funded, ends when minimum unit count reached

Lead Time

7 Days